Annis Meters
Pocket-sized calibrated magnetometers giving an instant indication of the magnitude and polarity of residual magnetism in components after MPI.
BrochureSee more
PBU 350 Portable Bench
The PBU 350 is a portable magnetic particle testing bench with built-in power pack, supplied in Malaysia by Asia NDE.
Compact stainless steel portable MPI bench with integral power pack, AC/HWDC magnetising up to 1000A RMS and demagnetisation, running from a standard 13A supply.
Overview
Key advantages
- Only requires a 13 Amp supply.
- Current flow up to 1000A AC RMS (1800A peak equivalent) and 700A HWDC.
- AC / HWDC magnetising, with single phase FWDC optional.
- Demagnetisation cycle.
- Stainless steel construction.
- Compact with integral power pack.
- Shot times of 1, 2 and 3 seconds as standard (dual shot times available).
- Gas spring headstock pressure and manual locking tailstock.
- Footswitch for ease of use.
- Optional flux flow, bi-directional coils and current pre-selection.
Overview
The PBU 350 is Baugh & Weedon’s portable MPI bench. It runs from a standard 13A socket and can be fitted with an inking system. A gas spring provides clamping pressure on the headstock for optimum electrical contact, and the coil can be manually rotated through 90° for bi-directional inspection.
Key specifications
| Parameter | Value |
|---|---|
| Current flow | 1000A AC RMS (1800A peak); 700A HWDC twice mean |
| Waveforms | AC, HWDC standard; single phase FWDC optional |
| Contact pads | 50 x 60mm braided copper |
| Coils | 100 or 150mm diameter, 3 turn, in head and tailstock |
| Supply | 220V 10A (dual voltage 110V 30A / 220V 10A available) |
| Size | 800 x 550 x 380mm |
More in Magnetic Particle Inspection
Custom MPI Benches
Bespoke Magazon-series magnetic particle inspection benches designed and built by Baugh & Weedon to suit specific component sizes, magnetising modes and production requirements.
BrochureSee more
Browse other categories
Eddy Current Flaw Detectors
Hand-held eddy current, ACFMT and bond testing flaw detectors, plus probes and reference standards.
Automated Inspection
Eddy current instruments and modules for integration into production lines and robotic systems.
Tube Inspection
Eddy current and flux leakage systems for heat exchanger, condenser and fin fan tubes.
Conductivity Meters
Eddy current conductivity meters for material sorting, heat treatment and damage verification.
Aircraft Wheel Inspection
Automated eddy current scanning systems for aircraft wheel shops.
Pulsed Eddy Current
Pulsed eddy current systems for corrosion under insulation, coatings and fireproofing.
Liquid Penetrant Inspection
Modular penetrant process lines and PFINDER penetrants, removers and developers.
Magnetic Flux Leakage
High-resolution MFL scanners for storage tank floor corrosion mapping.
Ultrasonic Testing
Thickness gauges, transducers, phased array probes, bond testers and automated UT systems.
Bond Testing
Multi-mode bond testers for disbond and delamination detection in composite, honeycomb and metallic bonded structures.
